0700301084 / ESAB® Rogue EM 210 PRO MIG Welder

$1,153.90

Starting at /mo with Affirm.

AvailabilityIn stock

SKU

0700301084

ESAB Rogue EM 210 PRO is an inverter-based MIG welding system designed to address all your welding project needs, from light fabrication to repair and maintenance. The system features industrial-grade arc performance and full featured controls that allow the welder to fine tune arc characteristics based on the material they are welding.

With a weight of only 16.9 kg (37.3 lbs), dual voltage 120/230V single-phase input and compatibility with 11 kVA (10 kW) generators, this system provides maximum flexibility and portability, both in the shop and in the field.

More Information

Brand

ESAB

Features

Full feature MIG/MAG machine for Synergic MIG, Manual MIG, MIG Brazing, Flux-Cored.
Intuitive 5.0 in TFT screen offers clear views with direct interaction.
Synergic Weld Programs – full range of welding parameters, 0.5 – 8.0 mm (0.020 – 0. 30 in.) with single knob control.
Power Factor Correction (PFC) – ensures a stable arc, resistant to power fluctuations even while working on long extension cables up to 100 m (328 ft).
Unique rugged industrial design – supporting multiple lift points and cable management.
Arc Dynamics – fine tune arc characteristics for a crisp/stiff arc for carbon steel or a smooth/soft arc for stainless steel.
Jobs – 10 memory save/recall function.
Spool Gun Ready – Rogue automatically configures set up when spool gun is connected (Spool gun sold separately).
Multi-language display – configure the display to 1 of 29 languages.
Energy Save Mode – after 2 minutes of inactivity the unit will enter this state to reduce power consumption.
P23S rated for indoor/outdoor use.

Specifications

Input Voltage	230 VAC ±10 %, 1 Φ, 50/60 Hz 120 V ±10 %, 1Φ, 50/60 Hz
GMAW Welding Output	100 A19.0 V (120 V) @ 25 % Duty Cycle 82 A18.1 V (120 V) @ 60 % Duty Cycle 63 A17.2 V (120 V) @ 100 % Duty Cycle 210 A24.5 V (230 V) @ 25 % Duty Cycle 136 A20.8 V (230 V) @ 60 % Duty Cycle 105 A19.2 V (230 V) @ 100 % Duty Cycle
Current Range	10-210 A
Voltage Range	10.4-27.2 V
Wire Feeder Specifications	2.0-16.5 m/min ( 75-650 in./min )
Open Circuit Voltage	78 VDC
Wire Diameter Aluminum Mild Steel Flux Cored Stainless Steel	0.8-1.2 mm ( 0.030-0.045 in. ) 0.6-1.0 mm ( 0.023-0.035 in. ) 0.8-1.2 mm ( 0.030-0.045 in. ) 0.8-1.0 mm ( 0.030-0.035 in. )
Max Spool Diameter	100 & 200 mm ( 4 & 8 in. )
Power Factor at Maximum Current	0.99
Efficiency at Maximum Current	80 %
Energy Save Mode	<50 W
Supply Plug	NEMA 6-50P
Operating Temp	-10 - +40 °C
MCableX	14/2, 3 m (10 ft)
Rated kVA	6.2 kVA (230 V) 2.4 kVA (120 V)
Recommended Generator	6.0 kW (120 V) 10 kW (230 V)
Enclosure Class	IP23S
Certification Mark	cETLus
Dimensions, L x W x H	548 x 229 x 406 mm ( 23.2 x 8.7 x 15.2 in. )
Weight	16.9 kg ( 37.3 lbs )
Setting Range	10.4-27.2 V (10-210 A)

Title
Rogue EM 210 PRO Spec Sheet

(1) Rogue EM 210 PRO MIG/MAG power source.
(1) 3 m (10 ft) Tweco Fusion 180A MIG Gun.
(1) Tweco Velocity contact tips 1 ea 0.6/0.8/0.9 mm (0.023/0.030/0.035 in.).
(1) feed rolls 0.6/0.8 mm (0.023/0.030 in.) V, 0.8/0.9 mm (0.030/0.035 in.) V and 0.8/0.9 mm (0.030 /0.035 in.) VK.
(1) 3 m (10 ft) work clamp leadset with heavy duty 50mm OKC connection
(1) Victor Ar/CO2 regulator/flow gauge.
(1) 3 m (10 ft) Gas hose, 3 m (10 ft) mains cable with NEMA 6-50P plug.
(1) Power Adapter – NEMA 6-50R to NEMA 5-15P.
(1) ESAB OK AristoRod 12.50 1 kg ( 2.2 lbs) in 0.8 mm (0.030 in.) wire.

$100 Rebate