ED033119 / Pipeliner® 80Ni1 - 1.0 mm (0.040 in) - 33 lb Spool

$302.78

Starting at /mo with Affirm.

AvailabilityIn stock

SKU

ED033119

Pipeliner® 80Ni1 from Lincoln Electric is a micro-alloyed MIG wire designed for semi-automatic or automatic welding of root, hot, fill and cap passes.
1.0 mm (0.040 in).

More Information

Brand

LINCOLN ELECTRIC

Features

Root pass capability up to X100 and hot, fill and cap pass up to X80 grade pipe.
Impact toughness capable of exceeding 69 - 95 J (51 - 70 ft·lbf) at -50°C (-58°F).
Q2 Lot® - Certificate showing actual deposit chemistry available online.
Excellent wire placement for narrow groove welding.
ProTech® packaging system.
This micro-alloyed MIG wire is designed for semi-automatic or automatic welding of root, hot, fill and cap passes on up to X80 grade pipe and root passes on up to X100 grade pipe.

Specifications

CONFORMANCE

Classification
ER80S-G Requirement
Typical Result, As-welded

Shielding Gas	Polarity	Yield Strength @ 0.2% Offset MPa (ksi)	Tensile Strength MPa (ksi)	Elongation %	Charpy V-Notch J (ft-lbs) @ -30°C (-20°F)	Charpy V-Notch J (ft-lbs) @ -60°C (-75°F)	Hardness Rockwell B
Not Specified	DC+		550 (80) min.				Info. Only
80% Ar, 20% CO2	DC+	510-600 (74-87)	620-670 (90-97)	25-27	92-142 (68-105)	68-100 (50-74)	91-95

Classification
Typical Result

Shielding Gas	Polarity	%C	%Cr	%Cu	%Mn	%Mo	%Ni	%P	%S	%Si	%Ti	%V	%Zr
80% Ar, 20% CO2	DC+	0.06-0.09	0.03-0.05	0.16-0.20	1.27-1.32	0.02 max.	0.75-0.87	0.005-0.009	0.005-0.009	0.56-0.65	0.03	0.005 max.	0.001 max.

Classification
ER80S-G Requirement
Typical Result

%Al	%C	%Cr	%Mn	%Mo	%Ni	%P	%S	%Si	%Ti	%V	%Zr	%Ti+Zr	%Total Cu
		0.30 min. *		0.20 min. *	0.50 min. *
0.01 max.	0.06-0.08	0.04	1.46-1.57	0.01 max.	0.84-0.92	0.005-0.010	0.005-0.011	0.74-0.77	0.07	0.01 max.	0.001 max.	0.04-0.06	0.19-0.21

Title
Pipeliner® 80Ni1 Spec Sheet